The agent used to better glue the print to the work table.
Hotend E3D V6 1.75mm 12V
Version 6 has been refined construction based on the experience gained from previous heads. Improved and improved operation of new filament types such as NinjaFlex. The smooth and undistorted travel of the filament provides a PTFE tube that enters the head but does NOT reach the hot zone of the head, so it is still a fullmetal head. The head can be operated at temperatures of over 300C with thermocouple instead of thermistors.
The heating block allows the target operating temperature to be reached quickly. The head is warmed up from 20C to 200C in 65 seconds and can be stabilized at 0.5C
The changed design of the cooling element and the new fan mounting also made the entire head shorter – the verge 6 has only 62 mm in length and reduced weight.
Dimafix provides excellent adhesion between print and glass so that peeling off prints is not a problem, even with large ABS prints. You can print from a variety of thermoplastic materials: ABS, PVA, Filaflex, Polypropylene, HIPS, Adhesion to the substrate is activated when the table temperature reaches more than 50 ° C.
Gdy temperatura stołu spada (40-50ºC) efekt klejenia znika i modele łatwo odchodzą.
Jest rozpuszczalny więc jest łatwy do czyszczenia wyłącznie wodą.
Opakowanie Dimafix 400ml starcza na ponad 100 wydruków.